STLINK-V3SET, Modular Debugger / Programmer For STM32 / STM8
1 / 7
LuxtronicsMCU ToolsIn Stock

STLINK-V3SET, Modular Debugger / Programmer For STM32 / STM8

★★★★★
4.889 Ratings & Reviews|100% Genuine Guaranteed
STLINK-V3SET, modular in-circuit debugger and programmer for STM32/STM8.
Description.
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers.
It is composed of a main module and a complementary adapter board.
STLINK-V3SET
modular in-circuit debugger and programmer for STM32/STM8.
₹10,299
Inclusive of all taxes (GST included)
Check Delivery Time & Code:
Delivery by Saturday, 21 Nov (Free Express Delivery) Cash on Delivery Available
Quantity:
1 Year WarrantyOfficial Brand Coverage
7 Days ReplacementHassle-Free Returns
Free Express ShippingSecure Delivery
Cash on DeliveryPay only when you receive
Secure & Trusted Checkout
RuPay
amazonpay
Pay

🔗Frequently Bought Together

STLINK-V3SET, Modular Debugger / Programmer For STM32 / STM8

STLINK-V3SET

₹10,299

+
Luxtronics Charger

Luxtronics 3-in-1 Foldable Magnetic Wireless Charger

₹3,999

Total Price:₹14,298

Overview & Features

STLINK-V3SET, modular in-circuit debugger and programmer for STM32/STM8.. Description. The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing for instance the programming of the target through bootloader. The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board.. Key Features. Stand-alone probe with modular extensions. Self-powered through a Micro-B USB connector (does not provide power supply to the target application). USB 2.0 high-speed compatible interface. Direct firmware update (DFU) support, to use with more future devices. - JTAG / serial wire debugging (SWD) specific features:. - 3V to 3.6 V application voltage support and 5 V tolerant inputs. - Flat cables STDC14 to MIPI10 / STDC14 / MIPI20 (connectors with 1.27 mm pitch). - Flat cable for 20-pin JTAG/SWD (2.54 mm pitch) (extra free cable from Waveshare). - SWD and serial wire viewer (SWV) communication support. SWIM specific features (only available with adapter board MB1440):. - 1.65 V to 5.5 V application voltage support. - SWIM header (2.54 mm pitch). - SWIM cables with dual 4-pin connectors / 4-pin connector to separated pins (2.54 mm pitch) (extra free cables from Waveshare). - SWIM low-speed and high-speed modes support. Virtual COM port (VCP) specific features:. - 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs. - VCP frequency up to 15 MHz. - Available on STDC14 debug connector (not available on MIPI10). Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:. - 3 V to 3.6 V application voltage support and 5 V tolerant inputs. - Signals available on adapter board only (MB1440). Drag-and-drop Flash programming. Two color LEDs: communication, power.. Supported Software. STM32CubeProgrammer. KEIL RVMDK. IAR EWARM. GCC-based IDEs.. Supported Devices. All STM8 MCUs with SWIM interface. All STM32 MCUs with JTAG / SWD interface.. Package Contents. STLINK-V3SET x1. USB type A plug to micro B plug cable x1. 20-pin JTAG/SWD flat ribbon (extra free) x1. SWIM dual 4-pin connectors cable (extra free) x1. SWIM 4-pin connector to separated pins cable (extra free) x1..

STLINK-V3SET, modular in-circuit debugger and programmer for STM32/STM8.

Verified authentic specification & quality tested.

Description.

Verified authentic specification & quality tested.

The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers.

Verified authentic specification & quality tested.

It is composed of a main module and a complementary adapter board.

Verified authentic specification & quality tested.

Technical Specifications

General Information
Model NameSTLINK-V3SET, Modular Debugger / Programmer For STM32 / STM8
CategoryMCU Tools
Core Specifications
Spec 1STLINK-V3SET
Spec 2modular in-circuit debugger and programmer for STM32/STM8.
Recommended For You
View Full Catalogue
ST-LINK V2 STM8/STM32 Emulator Programmer
New Arrival30% OFF
LuxtronicsST-LINK V2 is a 2-in-1 tool for debugging and programming STM8 & STM32 MCUs, supporting firmware download and online emulation debugging.

ST-LINK V2 STM8/STM32 Emulator Programmer

4.8(94)
₹199₹285
Inc. GST
In Stock