
WAVESHARE CAN FD Protocol Converter Bidirectional Data Communication
₹8,134

Luxtronics 3-in-1 Foldable Magnetic Wireless Charger
₹3,999
. Operating voltage: DC 9V - 36V. Installation: rail mounted. Reload button: long press to restore the use of settings. Indicator: POWER, WORK, COM, CAN. CAN port specification: 1 CAN port, support CAN FD, compatible with CAN 2.0A/2.0B. CAN port baud rate: 5Kbps - 1Mbps; data domain baud rate: 100Kbps - 5Mbps. Termination resistor: built-in two 120-ohm termination resistors, dial any one of the dial code to ON, and connect a 120-ohm resistor in parallel, two dial code to ON, and connect two 120-ohm resistors in parallel. Network port specification: RJ45, 10/100Mbps, cross direct connection adaptive. Serial port specification: support one way RS485 or RS232 access. Operating temperature: -40 - 85 degrees Celsius. Storage temperature: -40 - 105 degrees Celsius. Operating/storage humidity: 5%RH ~ 95%RH (no dew). Network protocol: TCP server, TCP client, UDP server, UDP client (network port). Modbus gateway: Network port: CAN FD to Modbus TCP (master/slave); 15. Serial port: CAN FD to Modbus RTU (master/slave). Send/receive messages: supports configuration of up to 64 messages. Conversion modes: transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, customized header and footer conversion. CAN ID: supports standard frame, extended frame. Frame ID filtering: supports standard frames only, extended frames only, customized input frame IDs (up to 32 groups). Packed frame number and time: support customized packed frame number, customized packed time (network port). Conversion direction: support bi-directional conversion, only serial/network port to CAN, only CAN to serial/network port. Firmware upgrade: support the upper computer firmware upgrade. Parameter configuration: AT command, host computer software configuration. Other functions: support for heartbeat packets, registration packets; normal, loopback, listen-only mode (network port). Electrostatic protection: air discharge 8KV, contact discharge 6KV. Electric fast pulse group: power supply circuit 2KV, RS485/RS232 circuit 1KV, CAN circuit 1KV, network interface circuit 1KV. Surge interference test: power circuit differential mode 1KV, common mode 2KV, CAN loop common mode 2KV, serial port loop common mode 2KV, network interface loop common mode 2KV. Size: about 11 x 8.56 x 2.7cm..
Verified authentic specification & quality tested.
DC 9V - 36V.
Rail mounted.
Long press to restore the use of settings.